Filter
Top Products
4. To abort dialing, press END key.
~24~
handset responds.
4. Before a handset answers, the INTERCOM can be cancelled from the
base by pressing INTERCOM again. However, once a handset answers,
only the answering handset can end the call.
Notes:
1. After a link established, the Base ID will appear on the
upper-right corner. If no Base ID shown up, it applied that
you are approaching the boundary of the coverage.
2. If the line is occupied, the LCD shows “No Line Available”
and handset returns to standby mode.
3. If a link cannot be established, the LCD will show “No Base”
after a 12-second time out.
4. A call duration timer will start displaying the length of the
call after link is established.
C. Intercom/2-Way from Handset to Base
1. Press Intercom key followed by a two-digit base ID
[Note: Base 1 ID as 10, Base 2 ID as 20, Base 3 ID
as 30, and Base 4 ID as 40]
2.
The base will ring once, then automatically connect
the intercom call from a handset.
11
Please enter
Ext. #: 10
Making a Broadcast
A. Handset to Handset Calls
Making an 2-Way/ Intercom Call
The EnGenius Industrial Cordless Phone System offers private, Intercom/ 2-
way radio calls independence of base station. Intercom/ 2-way
communication can be placed from or to base stations and handsets.
A. Handset to Handset Calls
1. Broadcasting all handsets
a. Press “BROADCAST” key from one handset
b. Hear bi-bi-beep while the initiating handset
broadcast all handsets within communication
coverage
c. Start to speak the message to be broadcasted
once you hear the “beep” sound; the
speakerphone of destination handsets will be
opened up
d. Press END key to end the broadcasting
11
PA paging
to all…
1. Press Intercom key followed by a two-digit handset
ID or Group ID.
2.
Press END key to end the call.
11
Please enter
Ext. #: 12
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows “No
Connection” after a 12-second time out.
2. Broadcasting a group of handsets
a. Enter the Group ID and then press
“BROADCAST” key
b. Hear bi-bi-beep while the initiating handset
broadcast all handsets within communication
coverage
c. Start to speak the message to be broadcasted
once you hear the “beep” sound; the
speakerphone of destination handsets will be
opened up
d. Press END key to end the broadcasting
11
PA paging
to Ext. # 02
B. Intercom/2-Way from Base to Handset
1. Press Intercom key on the base station to intercom
all registered handsets. The first handset to answer
will establish a voice link with the base.
2.
The INTERCOM LED will flash until a handset
responds.
11
Intercom from
Base 1
SLIENT
3. Broadcasting an individual handset
a. Enter the Handset ID and then press
3. The base unit will page for 15 seconds, then terminate the page if no
11
PA paging
to Ext. # 12
~23~