Filter
Top Products
Ending a Call
~28~
3.
To leave the mute state, press “UNMUTE” (Left) soft key. Mute is
effective only for the current call.
To end a telephone or intercom call, press END key or place handset into
charger cradle.
Do Not Disturb (Silent Ring)
Adjusting Receiver (Earpiece) Voice Volume
11
Sounds: ÇÈ
1.
Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Default as
volume 4. Use ¿andÀ scrolling key to adjust.
3. The new setting remains effective for all future calls until changed.
11
00:00:10
Volume:4
OPTION HOLD
1. Enter the key sequence MENU – Sounds – Ring
Volume, then select “Off”. Press SAVE to confirm
your choice. This will turn off the ringer until it is turn
on again from the menu.
2.
For temporary silencing the ringer when an incoming
call arrives, press SILENT (Left) soft key.
1. Ring Volume
2. Ring Tone
11
Ring Volume: ÇÈ
Off
SAVE
Placing a Call On Hold
Key Guard
1. When a call is in progress, it can be put on hold by
pressing the HOLD (Right) soft key.
2.
To return to the conversation, press “UNHOLD”
1. To prevent accidental dialing, you can press Menu
(Right) soft key, then press “1” to select KeyGuard
option. The handset keypad is locked. No key entry
is accepted except the power on/off key.
2.
To unlock the keypad, press “UNLOCK” (Left) soft
key, then, within 2 seconds, press the digit “1” to
unlock.
3. Key Guard is in effect until unlocked or powered off.
11
Welcome!
UNLOCK
11
You have a
Call on hold
UNHOLD
OPTION
11
Press 1 to
confirm
unlock
Notes:
1. The call being placed on hold can only be “un-hold” by the
handset that puts it on hold.
2. Handset LCD displays a call is being on hold. An alert tone
(double beep) every 30 seconds will remind the handset that a
call is being on hold.
3. If the operation (e.g., call transfer) after putting a call on-hold
fails, the held call may be dropped.
4. You can power off the handset (e.g., change battery) while call
is on hold. After power on again, you can continue the call by
pressing UNHOLD (Left) soft key or select “3” from the Option
menu to terminate the hold state.
5. You can only unhold the call with the base coverage. Once
you’re out of the base coverage, you can return to stand-by
using “Clear hold” function in the OPTION list item #3.
To View Missed Call(s)
11
You have 1
Missed call
VIEW
MENU
1. Whenever you have missed incoming call(s), you can
press VIEW soft key to enter the call logs information.
2.
You need to subscribe the caller ID service from local
telecom company to retrieve this data.
Battery Recharge and Replacement
Mute
1. Charge the battery when one or several of the following happen:
a. Phone beeps twice every two seconds.
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
1.
After a link is established, you can press OPTION (Left) soft key and
press “0” to mute the handset microphone.
2.
When mute is active, the other end will not hear your voice, but still can
speak to you.
~27~