Dell X51v PDAs & Smartphones User Manual


 
94 Getting Connected
Configure wireless networking for your device in one of the following
scenarios:
Network Card is set up
Wireless Network is broadcasting SSID
Wireless Network is not broadcasting SSID
If the Network Card is Set Up
Normally the internal wireless card is already set up. There are times when
you must choose the network card. On the Axim X51/X51v configurations
that have built-in wireless, the network card is associated with the enabled
wireless. If wireless is not enabled or you are using a socket card for
wireless connection, then choose the network card:
1
Ta p
Start
Settings
Connections.
2
Ta p
Network Cards.
3
Choose either
Internet
or
Work
from the menu.
4
Choose the network card to connect to the network. For the
Axim X51/X51v with built-in wireless, choose
Dell Axim X51/X51v
WLAN Wireless Adapter.
5
Choose whether the network card assigns an IP address or receives an
IP address automatically.
6
Enter the Server IP addresses if required and tap
OK.
If the Wireless Network is Broadcasting SSID
1
Press the wireless button to enable wireless capability. The green LED
in the right top corner of the device indicates that the wireless
is functional.
2
Ta p
Start
Settings
Connections.
3
To add, edit, or delete a profile, select the corresponding action and
tap
Network Cards.
4
In the
Configure Wireless Networks
window, select one of the available
network names and tap
OK.