Filter
Top Products
104 Getting Connected
3
Enter a name for the connection.
4
In the
Host name/IP
field, enter the VPN server name or IP address.
Your network administrator provides you this information.
5
Depending on the type of authentication that you want to use with
your device, tap
IPSec
or
PPTP
next to
VPN type
.
If you are unsure about which option to select, contact your
network administrator.
6
Ta p
Next
and enter your username, password, and, if required, domain.
7
Install the network card driver, if required. For more information,
see the documentation that came with your network card.
8
Ta p
Finish.
9
To manually start a connection, tap and hold the connection, and
tap
Connect.
NOTE: A VPN connection requires physical connection to a network.
Ensure the unit is linked to a wire or wireless network before you
manually start a VPN connection.
Ending a Connection
To disconnect:
• To delete a connection, tap and hold the connection you want to
remove, and tap
Delete.
• When connected through a cable or cradle, detach your device from
the cable or cradle.
• When connected through the infrared sensor, move the device away
from the computer.
• When connected through a network (Ethernet) card, remove the card
from your device.