Filter
Top Products
50 Operating the Axim
When the device is docked in the cradle, the power button on the device
turns on and the connection status icon appears on the command bar
(see page 56).
NOTE:
The power button on the device indicates the charge status of the
main battery. See the description of the power button lights on page 47 for
more information.
The spare battery status light on the cradle operates as follows:
• Green — The spare battery is fully charged.
• Amber — The spare battery is charging.
To remove the device from the cradle, pull the device straight up and out
of the cradle.
Using the Sync Cable
Use the sync cable to connect your device directly to the computer
without using the cradle.
NOTE:
The sync cable is optional depending on the configuration of your device.
To connect the sync cable:
1
Connect the sync cable connector to your device. Ensure that the
Dell logo is facing upwards.
2
Connect the USB connector of the cable to the USB connector on
your computer.
NOTICE: To avoid damaging the sync cable connector, press the two buttons
on the sides of the connector to release the lock before inserting or pulling out
the connector.