Vertical Communications DX-80 Telephone User Manual


 
Page 6 P7292 DETUG 09/01
Operation
1. When you place a call and receive a busy signal, hang up.
2. Press !78.
Call Operator/Attendant 0
The extension that is programmed as the Attendant may receive multiple
internal calls via the programmed Operator Code. The Operator Code is “0”
at default.
Operation
To call the attendant (operator), press 0.
Conference, Meet Me 390397
Conference is used to join telephone connections together. Meet Me
Conference simplifies the setup process by assigning eight separate
conference locations that are joined by dialing the location number. (4
parties maximum each.) Callers can be transferred easily to these
locations. Users may simply dial the location number. Outside parties can
join the conference via the automated attendant simply by dialing the
location number at the auto attendant greeting.
Operation – Transfer a Caller to a Meet Me Conference
1. While connected to another extension or outside line, press .
2. Dial the Meet Me Conference destination for this call (390-397).
3. Hang up to complete the transfer.
Operation – Join a Meet Me Conference
1. Dial the Meet Me Conference destination to join (390-397).
2. Hang up when finished.
Operation – Join a Meet Me Conference from the Auto Attendant
1. When the automated attendant answers, dial the Meet Me
Conference destination to join (390-397).
2. Hang up when finished.