Vertical Communications DX-80 Telephone User Manual


 
DX-80 Digital Executive Telephone User Guide Page 17
Do Not Disturb – One Time !4
DND – One Time allows you to block outside line ringing (Transfer or
direct) while engaged in a call already. The advantage of DND – One Time
is that you don’t have to remember to deactivate DND. It will automatically
disable at the conclusion of the current call.
Operation
1. While you are connected on a call (outside line or Intercom), someone
transfers an outside line to your extension and it rings. To cancel
ringing for this call, press the feature button designated as DO NOT
DISTURB (if available) or press !4.
2. Do Not Disturb – One Time is activated.
3. DND will deactivate when the current call is disconnected.
Do Not Disturb – Override
DND – Override allows you to override the DND condition at another
extension. This feature should be used with some discretion since the
extension in DND has invoked the feature for that purpose.
Operation – Calling an Extension in DND
1. Place intercom call to the extension in DND. You will hear DND tone
and the display indicates the condition of the called extension:
EXT 103 DND
override
2. Press [override].
3. The called extension begins to ring.
Flash – CO Line !3
Flash – CO Line is used with servicing telephone company features like
Centrex
®
and Call Waiting. Flash – CO Line is used to generate a hook-
switch signal to the telephone company to invoke the feature.
Operation
While connected to an outside line, press !3.
Forced Intercom Call Forward !4
You can immediately forward tone ringing intercom calls to the attendant by
pressing the DND button.