Vertical Communications 8124S Telephone User Manual


 
Programming
YourTelephone
9.1 Programming For Speed Dialing
Speed dialing is a feature that lets you:
store and dial outside numbers using one or two buttons,
store and dial intercom numbers,
store frequently used feature codes.
Your can store numbers for speed dialing at the following locations:
any programmable button that is not now assigned as a line button
or other feature by the system administrator or installer,
keypad numbers 0–9,
a secondary level at either storage location.
Before you begin programming, write down the intercom or outside line
you will use and the number digits you are storing. Then, as you program
the speed dial numbers, write the first and second level numbers on your
telephone’s ID strips. You can also fill out the charts on the next page, if
you wish, for a personal record of your stored numbers.
NOTE: You cannot reprogram the HOLD and INTERCOM button
locations from your telephone; however, your installer can
reassign these buttons to other locations on your telephone or
to a console unit. Further, you cannot store a feature code on a
second level at any storage location.
NOTE: The Federal Communications Commission (FCC) requires
that when programming emergency numbers and/or making
test calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the
reason for the call.
2. Perform such activities in the off-peak hours, such as early
morning or late evening.
9
GCA70–313 Programming Your Telephone
Station User's Guide 9 – 1