Filter
Top Products
4.2 Parking Calls
You can place a call on hold in the system so that any station that does
not have line appearance for the call can answer it. You accomplish this
by placing the call in one of nine park orbits, where the call remains until
it is answered. If the call is not answered within a specified period of
time, the system will send it back to your station for service (this is
known as park recall).
When you press a personal or group intercom button and dial a code to
retrieve a parked call, the system removes it from the park orbit and
places it at your station.
You can program a PARK button at your telephone and use it to simplify
call parking.
• To park a call,
1. While on the call, press INTERCOM.
2. Press ✳.
3. Dial code for park orbit (91–99 for orbit 1–9).
4. Remember the code for later use or make it known to those who
need to know it in order to retrieve the call.
• To park a call using a preprogrammed PARK button,
1. While on the call, press the preprogrammed PARK button (the call
is placed in a preselected park orbit).
If call is not retrieved within a programmable time limit, it reverts to the
parking station as a standard held call, and only one call can be placed in
an orbit at a time.
• To retrieve a parked call,
1. From any station, press INTERCOM.
2. Press #.
3. Dial park orbit access code (91–99 for orbit 1–9), or press
preprogrammed PARK button.
4. Answer call.
GCA70–313 Placing Calls On Hold
Station User's Guide 4 – 3