Vertical Communications 8124S Telephone User Manual


 
To later redial the saved number,
1. Lift handset or press line button.
2. Press SAVE NUMBER REDIAL button (system automatically
dials the number that you saved earlier).
3.4.1 Using The Automatic Redial Feature
(8124S, 8112S and 8212S only)
If your station has the multiple automatic redial feature enabled, you can
place up to 10 numbers in your telephone’s redial queue. Your telephone
will redial the numbers one at a time, in the order you placed them in the
queue, until (a) the call is answered, (b) you cancel the automatic redial
feature for a particular number, or (c) your telephone has dialed the
number a preprogrammed number of times (set by your system installer).
To use the automatic redial feature to redial a busy or
unanswered number,
1. While the telephone is idle, press 70 or press the AUTOMATIC
REDIAL button programmed by your installer.
2. The system queues the last number dialed that is not already in the
queue and repeatedly dials the number until you cancel the feature
or the system has dialed the number a preprogrammed number of
times (determined by your system installer).
3. The AUTOMATIC REDIAL light flashes between redials and
turns on steady during redialing.
4. When the distant party answers the call, the AUTOMATIC
REDIAL button while on the call to cancel automatic redialing,
—OR—
if your installer has enabled answer supervision on your line, the
system automatically cancels automatic redialing and turns the
AUTOMATIC REDIAL light off.
5. If your system installer has enabled the redial multiple numbers
feature, you can have up to 10 numbers in your redial queue. To
add numbers to your redial queue, repeat step 1 in the above
procedure.
Making Calls GCA70–313
3 – 4 Station User's Guide