Vertical Communications 8124S Telephone User Manual


 
8.3 Sending LCD Messages
You can set system-supplied messages at your station to be received and
displayed by a calling LCD speakerphone. These messages give the
caller information on your telephone status. Get a list of the available
messages from the attendant and write on the blank chart on the next
page.
To turn on LCD messaging,
1. Press INTERCOM.
2. Dial 02.
3. Press # to clear current message if one is stored.
4. Dial message code number (01–30).
5. Press # andthenpressSPEAKER to end message.
6. Your INTERCOM light flashes to indicate you have set LCD
messaging.
To send an LCD message when you call and receive a busy signal
or no answer,
1. While still on the call, press the appropriate fixed RESPONSE
MESSAGE button to send a preselected message (Call [your
name], for example) to the other telephone.
To send an LCD message to a caller who has initiated a SOHVA
or intercom call from another LCD telephone,
1. Hear the SOHVA tone or voice announcement in your handset or
headset.
2. Press the appropriate fixed RESPONSE MESSAGE button to
send a preselected message (I Will Call Back, for example) to the
calling telephone.
GCA70–313 Programming Your Telephone
Station User's Guide 8 – 3