Vertical Communications 8124S Telephone User Manual


 
Making Calls
3.1 Making Calls
The 8212N and 8112N telephones require that you lift the handset before
performing any operations with the telephone. When using the 8212S,
8112S, and 8124S, however, you may do one of three things in order to
use the telephone: lift the handset, press the INTERCOM button, or
press the SPEAKER button.
3.2 Dialing Automatically
The Automatic Dialing feature provides one- or two-button speed dialing
using programmable buttons with stored numbers. Two levels of number
storage are available at each storage location, and you can use one or
both levels as needed. Further, since you usually store a line choice as
part of a speed dial number, line selection is automatic with speed
dialing. This user’s guide discusses button programming in a separate
section. Refer to it when you are ready to store numbers at the
programmable buttons.
There are two types of speed dial numbers: (1) numbers that you store
for your own use (personal speed dial numbers), and (2) numbers that the
system attendant stores for everyone’s use (system speed dial numbers).
To automatically dial a speed dial number stored at one of the
programmable buttons on your station (8124S, 8112S, and 8212S),
1. Press preprogrammed speed dial button (line selection is usually a
part of the stored speed dial number),
—OR—
press SHIFT button, then press preprogrammed button (to choose
number stored as a second choice at that button).
3
GCA70–313 Making Calls
Station User's Guide 3 – 1