Vertical Communications 8124S Telephone User Manual


 
(The following instructions assume a tone-first default setting. Any user
can change a call to voice announce signaling by pressing the
INTERCOM button again after dialing the extension number or by
pressing the DSS button again.)
To manually cause the other telephone to ring,
1. Lift handset or press INTERCOM.
2. Dial extension number (called telephone will ring).
To tone call automatically,
1. Press DSS button (called telephone will ring).
(The following instructions assume a voice-first default setting. Any user
can change a call to tone signaling by pressing the INTERCOM button
again after dialing the extension number or by pressing the DSS button
again.)
To voice announce manually,
1. Lift handset or press INTERCOM.
2. Dial extension number.
3. Speak your announcement.
To voice announce automatically,
1. Lift handset and press DSS button.
2. Speak your announcement.
Some systems will be arranged so that certain stations have a hot line
feature. If your station is so arranged, every time you lift the handset,
your speakerphone will automatically ring a preselected station
(programmed by the installer). To make an intercom call to a station
other than this hot line station, or to make a call on an outside line, you
must press an intercom or line button before you lift the handset; then
you can dial the number.
GCA70–313 Making Calls
Station User's Guide 3 – 7