Filter
Top Products
34
When the user picks up the handset and dial the phone number, the CWP-100 starts searching the
pattern that coincide with the recent dial plan entries (from the bottom to the top).
In case the user dial “00123” and press “#” to make an outgoing call;
The CWP-100 will edit the final dialing number as “5551231004” and attempt the outgoing VoIP call.
In case the user dial “85556677” and press “#” to make an outgoing call;
The CWP-100 will edit the final dialing number as “5556677” and attempt the outgoing VoIP call to
“192.168.0.41”.
In case the user dial “5550001” and press “#” to make an outgoing call;
The CWP-100 will not edit the final dialing number since there is no pattern that coincide with the dial plan
entries, and attempt the outgoing call to “5550001”
9.3.4.2. Miscellaneous Functions
Parameter Description Default
Last Digit
Configuration
Press SEND after dialing the phone number to assign that the dialing
is completed and attempts the outgoing call. The user may set the
CWP-100 to attempt the outgoing cal after an assigned time without
pressing SEND.
Use
“SEND”
button
Use Speed
Dial
Enable the speed dial function. disable
Speed Dial
Setting
The user can assign up to 20 speed dial numbers for the phone
numbers or IP addresses that are mainly used.
N/A
9.4. NAT Traversal Configuration
The CWP-100 can enable NAT traversal when the CWP-100 has a private IP behind NAT environment. Then
the CWP-100 is able to make and receive external VoIP calls behind NAT. The user may use the external
STUN server or directly use the NAT router’s IP address to use NAT traversal.
Parameter Description Default
NAT Traversal
Select NAT traversal.
Not Use : Do not use NAT.
STUN : Use NAT traversal through STUN server.
Manual : Use NAT traversal manually when there is no appropriate
STUN server.
Not Use