Filter
Top Products
33
Usually, users use this function when he wants to call a remote VoIP device
directly with IP address without server registration.
Examples for Dial Plan
① Input the values as below and click the [Insert] button and then the [save] button.
In case the user dials the phone number that starts with 00 and press ‘#’ to make an outgoing call, the
CWP-100 will eliminate the first 2 digits, add “555” at the front as prefix and add “1004” at the end as
postfix and then attempt the outgoing VoIP call with the final phone number.
② Input the values as below and click the [Insert] button and then the [save] button.
‘?’ indicates any single digit. Thus in case the user dials a phone number of three or more digits that ends
with 77, the CPW-100 will reject the attempt and terminate the outgoing call immediately since the “Block”
parameter is checked.
③ Input the values as below and click the [Insert] button and then the [save] button.
In case the user dials the phone number that starts with 8, the CWP-100 will eliminate one digit at the front
and attempt the outgoing VoIP call to 192.168.0.41.
Generally, “Dest. Address” operates without registering the server addresses on “VoIP” page.
④ The final dial plan scenario s as follows.