Filter
Top Products
14
6.3. VoIP Setting
You need to register with the Internet Telephony Service Provider (ITSP) to utilize various VoIP services. You
may set the CWP-100 as your ITSP requests.
To set the system with the LCD and the keypad, follow the steps as MENU “3: System Setting” “2: VoIP
Setting”. Then you will enter the submenu and see the display as below.
1: Server Setting
2: Name Setting
3: Codec Setting
4: NAT Traversal
6.3.1. Server Setting
① Follow the steps as MENU “3: System Setting” “2: VoIP Setting” “1: Server Setting”.
1: SIP Server
2: Register On
3: Registrar Server
4: Registration
5: Outbound Proxy
6: Expiry[sec]
② Select “1: SIP Server” and input the SIP server address.
SIP Server
192.168.0.6
MODE : A
③ To register with the Registrar server, press “2: Register On” and select “Yes.”
④ In the same way, set the Registrar Server, Outbound Proxy and register Expires parameters.
Generally, the Registrar Server and Outbound Proxy are identical with the SIP Server.
The Registrar Server and Outbound Proxy may appear as FQDN
1
.
The Register Expires is the time for transmitting the Register message periodically so that the
CWP-100 keeps registering.
⑤ “4: Registration” indicates the current register status.
1
FQDN: Fully Qualified Domain Name. (domain name or IP address):(Port number). ex) clipcomm.co.kr:15060