Filter
Top Products
24
3: Time Server
4: Time Zone
5: Alarm Setting
6: Phone Lock
7: Firmware
8: Call Forwarding
8.3.1 Melody Setting
① Select “1. Melody Setting”.
1: Melody Selection
2: Melody Volume
② Use ▲,▼ to choose the ring melody that you wish to use and then press ENTER button.
③ Select “2. Melody Volume” and use ▲,▼ to set the melody volume and then press ENTER button.
8.3.2 Screen Message Setting
① Select “2. Screen Message”.
1: User Defined
2: Registration ID
② If you select “1: User Defined”, the CWP-100 display the main screen message and you can edit the
screen message here.
③ If you select “2: Registration ID”, the default phone number will be set as the main screen message.
8.3.3. Time Server Setting
① The CWP-100 receives the current time information from the time server. Select “3: Time Server” to
change the time server.
Enter IP Address
211.234.222.98_