Filter
Top Products
63 – ENGLISH
3-Way Conference Calling
You can set up a 3-way conference call with an external call
and a handset that is registered to the base.
1. During an external call, press
on the navigation
key and then the destination handset number that you
would like to join the 3-way conference call.
2. The destination handset should press
to answer.
3. Press
to start the 3-way conference call.
4. Either of the two internal handsets can press
to
leave the conference call at any time. If one of the
handsets drops the call, the remaining handsets will
continue the conference.
█ Paging
You can page the handset from the base unit to help locate the
handset. Press
on the base (hold for less than 5 seconds)
and all of the handsets registered to the base will ring for about
1 minute. To stop paging, press
on the base again or press
any key on the handset.
NOTE: If you hold
for more than 5 seconds, the base will
enter registration mode.
█ Key Lock
You can lock all keys on the keypad except for the M1 – M4
memory dial keys. While in locked mode, the handset still can
be answered by pressing
. When you hang up, the handset
will return to the locked mode.
To lock the keypad, in standby mode, press and hold until
the display shows “HS Locked” and the
icon appears.
To unlock the keypad, press and hold
until the icon
disappears.
While in locked mode, if you press any key, the phone will
generate a warning tone and “HS Locked” will be displayed.