Filter
Top Products
15 – ENGLISH
5. Holding the base slightly above the mounting screws on
the wall jack, push the base against the mounting screws
so they are hooked into the left and right keyhole slots
on the back of the phone. Slowly slide the base down
until it snaps into place.
6. Plug the AC power adapter into the electrical outlet.
CAUTION: To reduce risk of personal injury, fire, or
damage use only the adapter provided.
Installing Batteries Three AAA re-chargeable Ni-MH batteries
come with your phone. You must install the batteries before
using your phone.
1. Remove the battery compartment
cover by sliding it downwards.
2. Insert the new batteries. Be sure
to observe battery polarity as
imprinted on the inside of
the compartment.
3. Replace the battery compartment cover by
sliding upward until it clicks into place.
NOTE: The batteries need to be replaced if they do not recover
their full storage capacity after recharging. Check the battery
icon on the LCD to see the battery charge level. When replacing
the batteries, always use good quality Ni-MH AAA re-chargeable
batteries.