Filter
Top Products
53 – ENGLISH
TIP: Make sure the volume on the phone is set loud enough to
hear your incoming callers.
Play Messages
When a call is received and the TAM is ON and Announce1 is
selected, the machine will play the outgoing announcement, and
then perform message recording. The process is as follows:
After ringing N times, the phone enters answer-record mode
automatically and starts to play Announce1. The caller can
record after the tone.
Method 1: Using the Handset
1. Press the TAM soft key to display the TAM main menu
list.
2. Press down
to select Message and then press the
Select soft key.
3. Press the Select soft key again to select New MSG or
press down
to select Saved MSG and then press the
Select soft key.
4. The phone will announce “You have N new message(s)”
or “You have N saved message(s)”. The messages will
be played back and you can:
a. press
to delete the current message while it
is playing
b. press
to pause/play the current message
c. press
once to replay the current message and
twice to replay the previous message
d. press
to skip to the next message
e. press the Back soft key to stop playing and exit
NOTE: When listening to your messages through the handset,
the message will always start playing back through the handset
speakerphone. To switch to the earpiece, press
. You can
switch between speakerphone and handset while listening to
messages by pressing
.