Filter
Top Products
31 – ENGLISH
3. Press up or down to scroll to HS Reset and then
press the Select soft key. You will be prompted to enter
the PIN.
4. Enter the PIN (the default PIN is 0000) and then press
the Reset soft key. If the PIN is validated, the handset
settings will be reset to the initial factory settings,
otherwise the settings will remain.
5. After resetting, the handset will return to standby
mode.
█
Base Selection
This function allows you to select a base from those already
registered to the handset.
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to HS Settings and
then press the Select soft key.
3. Press up
or down to scroll to Select Base and
then press the Select soft key.
4. Press up
or down to select the base you want
and then press the Select soft key. If you select a non-
existent base, the handset will sound a warning tone.
5. The display will show Selected BS_X_ (Base 1-4).
Press the Select soft key to confirm. The display will
automatically return to the main screen.
█
Out of Range Alarm
This function allows you to know when the handset is out of
range of the base, and a beep will sound. Your ClearSounds
®
A600 comes from the factory preset for Out of Range Alarm
ON. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to HS Settings and
then press the Select soft key.
3. Press up
or down to scroll to Tone Setup and
then press the Select soft key.