Filter
Top Products
48 – ENGLISH
Answer Mode Selection
The answering machine offers 2 modes for operation.
Announce1 will answer and record, which is the conventional
outgoing message that allows the caller to leave a message.
Announce2 will answer only, which is the outgoing message
that does not allow a caller to leave a message (you may
want to select Announce2 if you do not want callers to be
able to leave a message). To choose the Answer Mode:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press down
to scroll to TAM Setting and then press
the Select soft key.
3. Press up
or down to scroll to ANNC Select and
then press the Select soft key.
4. Press up
or down to select Announce1 or
Announce2 and then press the Select soft key.
NOTE: Announce2 will be played if your answering machine
becomes full.
TAM Alert
A tone will sound every minute when there is a new message
and the tone will sound until messages are reviewed. This
tone will be heard when you are on a phone call for at least
60 seconds. To change this setting:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press down to scroll to TAM Setting and then press
the Select soft key.
3. Press down to select TAM Alert and then press the
Select soft key.
4. Press up
or down to select Off or On and then
press the Select soft key.