Filter
Top Products
49 – ENGLISH
Day Setting
Before each message is played, the day of the week and
time it was received will be announced. To set the day of the
week, you must use the base. To set the day:
Press and hold
until the current setting is announced.
Press and release repeatedly until you hear the correct
day, and then press
to confirm.
NOTE: If the batteries are removed, or the AC adapter
unplugged, the date will need to be set again.
█ Announcement Settings
Announce1 is a conventional outgoing message that allows
the caller to leave a message. This is the “answer and
record” message.
Announce2 is an outgoing message that does NOT allow a
caller to leave a message. This is the “answer only” message.
Each Announcement message can be up to 3 minutes.
Recording Announcement
Record Announce1:
The default announcement is “Hello, your call cannot be taken
at the moment. To record your message, please speak after
the tone.”. To change the Announcement:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press the Select soft key to select Announce and then
press the Select soft key again to select Announce1.
3. Press down
to scroll to Record and then press the
Select soft key.