Filter
Top Products
35 – ENGLISH
█ One-Touch Memory Setting & Dialing
Your phone allows you to program 4 frequently dialed numbers.
Each memory key can store up to 20 digits. You can insert
one 3 second pause into dialing or memory storage in order to
access custom and telebanking services, long distance, calling
cards, etc. Press the right
button at the desired point in
the number to insert the pause and the letter P will appear.
Storing M1-M4 Memory Numbers
1. Press the memory key (M1-M4) in standby mode.
2. The display shows “Number ?” Enter the desired number
(up to 20 digits) and you can use the Erase soft key to
erase digit(s). Then press the Next soft key.
3. Press up
or down to select from Melody 1 –
Melody 10 and then press the Save soft key.
NOTE: These will appear as the first four entries in your
phonebook.
Viewing, Editing or Deleting M1-M4 Memory Numbers
You can view, edit, and delete the M1-M4 memory dial number(s)
by following the instructions in Using the Phonebook Options,
found on page 60. The memory default names are M1:, M2:,
M3:, M4:, and you can add a name after the M1:- M4:, but you
can’t delete the default name.
Dialing from M1-M4 Memory Numbers
1. In standby mode, press one of the memory keys (M1-
M4), the display will show the corresponding number
and begin to dial. If you selected the wrong memory
dial, press
to hang up.
NOTE: If you turn the Key Lock feature on, the M1 – M4 keys
will still be operational (see page 63 for more details).