Filter
Top Products
vi
Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware Installation Guide
OL-15959-01
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in
this publication.
Timesaver Means the described action saves time. You can save time by performing the action described in the
paragraph.
Caution Means reader be careful. In this situation, you might do something that could result in equipment
damage or loss of data.
Tip Means the following information will help you solve a problem. The tips information might not be
troubleshooting or even an action, but could be useful information, similar to a Timesaver.
Accessibility
You can configure the Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM voice
gateways by using the Cisco command-line interface (CLI). The CLI conforms to code 508 because it is
text based and relies on a keyboard for navigation. You can configure and monitor all functions of the
voice gateway through the CLI.
For a complete list of guidelines and Cisco products’ adherence to accessibility, see Cisco Accessibility
Products at the following URL:
http://www.cisco.com/web/about/responsibility/accessibility/products
Related Documentation
The Cisco IOS software running your Cisco voice gateway includes extensive features and functionality.
For information that is beyond the scope of this document, or for additional information, use the
resources listed below:
• Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Hardware
Installation Guide (this document)
• Cisco VG202, Cisco VG202XM, Cisco VG204, and Cisco VG204XM Voice Gateways Quick Start
Guide
< > Nonprinting characters, for example passwords, appear in angle brackets in contexts where italic font is
not available.
[ ] Default responses to system prompts appear in square brackets.
Table 1 Documentation Conventions (continued)
Convention Description