Filter
Top Products
Using Advanced Phone Features
Using the Interactive Voice Response Menu on the Cisco SPA501G
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 62
4
73738 Restore the phone to the factory default software and settings.
Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and
begin the restore process.
87778 Restore the phone’s user settings to the default. (Clears all user settings
such as speed dials.)
Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and
begin the restore process.
732668 Reboot the phone. After entering #, hang up to begin rebooting.
111 Set a static IP address. Enter the address (use * to enter the “.” value),
then press #.
To s av e , p r e s s 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
121 Set a netmask. Enter the address (use * to enter the “.” value), then press
#.
To s av e , p r e s s 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
131 Set a gateway. Enter the address (use * to enter the “.” value), then press
#.
To s av e , p r e s s 1; to review, press 2; to re-enter, press 3; to exit, press *.
NOTE DHCP must be disabled to use this option; if DHCP is not
disabled, you receive an error message.
161 Set the address of the primary Domain Name Server (DNS). Enter the
address (use * to enter the “.” value), then press #.
To s av e , p r e s s 1; to review, press 2; to re-enter, press 3; to exit, press *.
181 Set the IP multicast address (used by a
Cisco Voice System to
communicate with the IP phone). Enter the address (use * to enter the “.”
value), then press #.
To s av e , p r e s s 1. To review the value you entered, press 2. To re-enter,
press 3. To exit, press *.
Number Option