Filter
Top Products
Using Basic Call Management Functions
Managing the Audio Source and Volume
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 28
3
Managing the Audio Source and Volume
Adjusting Call Volume
To adjust the volume of the handset or speaker, lift the handset or press the
Speaker button. Press + on the Volume button to increase the volume, or press - to
decrease the volume. Press Save. (Not available for the Cisco SPA501G.)
Adjusting the Ringer Volume
To a d j u s t t h e r i n g e r v o l u m e , p r e s s + on the Volume button to increase the volume,
or press - to decrease the volume when the handset is on-hook and the speaker
button is off. Press Save. (Not available for the Cisco SPA501G.)
Using Mute
To mute the handset, speaker, and headset microphones, press Mute. The button
lights red. Press Mute again to unmute.
If no audio device is on, pressing Mute has no effect. When switching from the
speaker phone to the handset, the phone is unmuted automatically.
Using the Speakerphone
To use the speakerphone, press Speaker (the handset can be either on or off
hook).
Using the Headset with Your IP Phone
Install the headset as described in the “Connecting Wired and Wireless
Headsets” section on page 22. Steps to use your headset with the IP phone
might vary. Consult the user documentation for your headset for more information.
To use a wired headset, press Headset on your phone and dial the number to
place a call, or press Headset to answer a ringing call.
To use a wireless headset, lift the receiver off hook before speaking or listening
through the headset.