Filter
Top Products
Installing Your Phone
Connecting the Handset
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 18
2
Numbered objects in Figure 1 are described in the following table.
Connecting the Handset
STEP 1 Turn the phone body over to expose the ports on the back of the device.
!
CAUTION Do not insert a telephone line cord into the auxiliary (AUX) port.
STEP 2 Insert the long end of the phone cord into the handset port on the phone body that
is marked with a phone symbol.
STEP 3 (Optional) Route the phone cord through the cable slot.
STEP 4 Insert the other end of the phone cord into the port at the bottom of the handset
(not shown).
#Description
1 Auxiliary port. (For use only with the Cisco Attendant Console.)
2 Upper slots.
3 Lower slots.
4PC port.
5 Network (switch) port.
6 Cable run.
7Handset port.
8 Power port. (Use only with a Cisco PA100 power adapter.)