Filter
Top Products
Installing Your Phone
Verifying Phone Startup
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 23
2
• Wired headsets—Connect the 2.5mm connector from the headset into the
headset port on the right side of the IP phone:
Verifying Phone Startup
After receiving power and network connectivity, the phone executes a boot-up
sequence. During this sequence, phones with screens display the Cisco logo and
then Initializing Network. All of the lights on the phone flash.
After your phone is successfully connected to the network and receives a basic
configuration, your phone line keys should glow green (on models with phone line
keys).
On models with screens, the phone displays the standard menu for the phone. The
date, name and number of the phone display on the top line of the IP phone screen.
At the bottom of the IP phone screen, softkeys are displayed over their associated
soft buttons.