Filter
Top Products
Using Basic Call Management Functions
Setting Do Not Disturb
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 38
3
Call Forward Deactivation by using Star Codes
Enter *73 to deactivate call forwarding all.
Enter *91 to deactivate call forward busy.
Enter *93 to deactivate call forward no answer.
Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone. If
you have voice mail configured, incoming callers can be immediately routed to
voice mail. If voice mail is not configured, callers will hear a busy signal or a
message.
You can also set Do Not Disturb from your PC by using the web configuration
utility.
For the Cisco SPA501G, you can only set Do Not Disturb in the web configuration
utility or set Do Not Disturb by using the Star Code.
Enabling Do Not Disturb
Do Not Disturb Softkey
To activate Do Not Disturb, press the dnd softkey. The IP phone screen indicates
that Do Not Disturb is turned on for your phone (except on the Cisco SPA501G).
Do Not Disturb by using the Star Code
Enter *78 to activate Do Not Disturb. Enter *79 to deactivate Do Not Disturb. On the
Cisco SPA501G, the Message Indicator Light blinks red when Do Not Disturb is
enabled.
Do Not Disturb by using Setup
To access Do Not Disturb:
STEP 1 Press the Setup button and select Preferences > Do Not Disturb.
STEP 2 Press the edit softkey.
STEP 3 Press y/n and choose y.
STEP 4 Press ok.