Filter
Top Products
Using the Phone Web User Interface
Viewing Attendant Console Status
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 74
5
Viewing Attendant Console Status
The SPA500S or SPA500DS user parameters are displayed in the Attendant
Console Status window.
The table identifies and describes the values in the Attendant Console Status tab.
Parameter Description
Unit Enable Yes indicates the unit is enabled. No indicates it is disabled.
Unit Online Yes indicates the unit is connected. No indicates it is not
connected.
Subscribe
Expires
Time in seconds when the current subscription expires.
After the subscription expires, the attendant console
automatically requests a new subscription.
Subscribe Retry
Interval
Length of time the attendant console waits to try again if
the subscription fails.
HW Version Hardware version of the attendant console.
SW Version Firmware (software) version of the attendant console.
Key Name assigned to each key (1-32) on the Cisco SPA5000S
or key 1-30 on the Cisco SPA500DS.
Name Name identifying the entry.
Type Function (for example, speed dial) that is enabled for each
key on the attendant console.
Line Displays the extension assigned to each key on the
attendant console.
Station Subscribe URI (uniform resource identifier) configured for
each key on the attendant console.
Subscribed Subscription status of the unit/key. The value can be Yes ,
Fail, or N/A. N/A indicates that the feature/function (fnc) of
that line does not require a subscription (such as speed
dial).