Filter
Top Products
Using Advanced Phone Features
Using the Interactive Voice Response Menu on the Cisco SPA501G
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 61
4
Using the Interactive Voice Response Menu on the
Cisco SPA501G
The Cisco SPA501G provides an interactive voice response menu. You can enter
options and receive information about the phone and its operation.
To access the IVR:
STEP 1 Press the Setup button.
Enter the IVR option by pressing the numbers of the option, then press #. Some
menus require entering of further information or numbers.
Typical options you might use are listed in the following table:
Number Option
100 Tells you if Dynamic Host Configuration Protocol (DHCP) is enabled.
110 Recites the IP address of the phone.
120 Recites the netmask of the phone.
130 Recites the gateway address.
140 Recites the MAC (hardware) address of the phone.
150 Recites the phone software version.
160 Recites the primary DNS server address.
170 Recites the HTTP port on which the web server listens. Defaults to 80.
180 Recites the IP multicast address (used by a
Cisco Voice System to
communicate with the IP phone).
220 Recites the method of call control (SIP or SPCP).
221 Set call control—enter the value for the call control method you want,
then press #:
• 0: SIP
• 1: SPCP
To s av e , p r e s s 1; to review, press 2; to re-enter, press 3; to exit, press *.