Cisco Systems SPA512G Telephone User Manual


 
Using Basic Call Management Functions
Putting a Call on Hold
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 31
3
Redialing a Call
To redial the last number on a Cisco SPA501G, press the Redial button.
To redial another number from a history list on all phones except the
Cisco SPA501G:
STEP 1 Press the redial softkey and select the desired number from the Redial list. Or
press the Setup button, select Call History, select the desired call history list, and
highlight the desired number.
It might be necessary to modify the number to add a prefix or area code. Press
edit and use the Softkey Buttons to modify a number. When you are finished,
press ok.
STEP 2 Lift the handset or press dial to dial the selected number.
Putting a Call on Hold
To put an active call on hold, press Hold. A series of beeps (default) or (optional)
music-on-hold plays for the caller to indicate that the call is on hold.
Resuming a Call
To resume the call that has been put on hold, press the flashing red line button for
the call. (On the Cisco SPA502G or Cisco SPA512G, press the resume softkey if
the default behavior is configured.)