Cisco Systems SPA512G Telephone User Manual


 
Using Advanced Phone Features
Using the Paging Feature
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 53
4
Using Speed Dials
Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G,
Cisco SPA512G, Cisco SPA514G:
To call one of your configured speed dial numbers, either:
Open a phone line and press the number on the phone keypad for the speed
dial, then press Dial.
Press the Setup button, select Speed Dial, choose the number, and press
Dial.
Cisco SPA504G, Cisco SPA508G, Cisco SPA509G, Cisco SPA514G, Attendant
Console:
Press the unused line button you have configured for a speed dial.
Cisco SPA501G:
Press the number on the phone keypad for the speed dial and wait a few seconds.
Using the Paging Feature
Your IP phone can automatically answer pages from other Cisco IP phones in the
Cisco Voice System. When your phone is paged, the phone emits a series of
beeps, and two-way audio is established between your phone and the phone that
called you. You do not have to accept the page.
Your phone must be part of a Cisco Voice Network to use this feature.
Paging Another Phone
To page another phone, dial *96 plus the extension of the phone you are paging. If
the phone you are paging is not set up to auto answer pages, the call will ring as a
normal voice call.
Paging a Group of Phones
Your phone administrator can configure a group of phones that you can page
simultaneously. Each paging group has a number associated with it. Your
administrator must give you the number of the groups that are configured. To page
this group, dial *96 plus the number of the paging group.