Filter
Top Products
Using Basic Call Management Functions
Placing a Three-Way Conference Call
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 42
3
STEP 3 Press dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
STEP 1 Press the Setup button.
STEP 2 Select Call Park Status.
STEP 3 Choose the parked call you want to retrieve and press unpark.
Placing a Three-Way Conference Call
You can start conference calls by:
• calling both numbers and pressing the conf softkey.
• conferencing an active and held call using the confLX softkey (except on the
Cisco SPA501G).
Three-way Conference Calling (except the Cisco SPA501G)
To initiate a conference call:
STEP 1 Press the conf softkey during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second telephone number.
STEP 3 Press the conf softkey again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected.
Three-way Conference Calling by using a Cisco SPA501G
To initiate a conference call:
STEP 1 Press the Conference button during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.