Cisco Systems SPA509G Telephone User Manual


 
Getting Started
Connecting Wired and Wireless Headsets (Optional)
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 15
1
Connecting Wired and Wireless Headsets (Optional)
The IP phones support wired and wireless headsets from different manufacturers.
Cisco SPA525G/G2 also support Bluetooth headsets. For the latest supported
models, contact your reseller.
Each brand and type of headset may require different steps for connection.
Consult the documentation for your particular headset for more information.
Additional information can be found at the manufacturer’s websites.
Task Instructions
Connecting a wired
headset
Connect the 2.5mm connector from the headset
into the headset port on the right side of the IP
phone.
Connecting a Wireless
(non-BlueTooth) headset
Connect the headset’s phone cord into the phone
port on the back of the IP Phone.
Connecting and enabling
a Bluetooth headset
Cisco SPA525G/G2
Available on Cisco SPA525G/G2 only
To enable Bluetooth:
1. Press .
2. Select User Preferences.
3. Select Bluetooth Configuration.
4. Press the right-arrow navigation button to turn
Bluetooth On.
5. Press .
Save