Filter
Top Products
Using Your Cisco SPA302D
Advanced Handset Configuration Options
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide 32
2
STEP 1 From the Settings menu, choose Phone Info.
STEP 2 Press the Up and Down Arrow buttons to scroll through the available phone
information:
• Model—Handset model.
• Software Version—Version of software that is installed on the handset.
• HID VID—Hardware version ID.
• PID—Product ID.
• SN—Serial number of your hardware.
• IPEI—International Portable Equipment ID, or a unique number used to
identify each DECT handset to the base station.
• Base RFPI—Radio Fixed Part ID, or a unique number used to identify each
DECT base station to the handset.
• IP Address—IP address of your handset.
• IP Mask—Subnet mask of your handset.
• Gateway IP—IP address of the router providing the Internet connection to
the handset and base station.
• WAN MAC Address—MAC (hardware) address of the handset.
• Default outgoing line—The outgoing line that the handset chooses first
when a call is placed.
• Incoming Lines—Incoming lines that are configured for the handset (for
example, DECT and PSTN lines).
Advanced Handset Configuration Options
You can configure some of the Cisco SPA302D handset options using the web-
based configuration utility. The Cisco SPA302D does not have its own
configuration utility, but is part of the configuration utility for the Cisco SPA232D.
The configuration utility is best used by a VoIP service provider, the phone system
administrator, or with the assistance of technical support personnel.
For more information about using the configuration utility, see the Cisco SPA232D
Mobility Enhanced Phone Adapter Administration Guide.