Filter
Top Products
Using Your Cisco SPA302D
Configuring Call Settings
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide 22
2
Configuring Call Settings
The Call Settings menu allows you to configure the following options for your
phone:
• Call Preferences, such as Do Not Disturb or Call Waiting
• Speed Dials
• Call Forwarding
• Outgoing Default Line
• Line Status
NOTE Depending on how your handset is configured (connected to the IP network or the
PSTN), all options and preferences described in this guide may not be available on
your handset. Contact your phone system administrator if you have questions
about which options or preferences are enabled.
Accessing the Call Settings Menu
To reach the Call Settings menu, press the center Select button, scroll to Call
Settings, and press the center Select button again.
In the Call Settings menu, press the Up and Down Arrow buttons to select the
settings you want to change and press the Select button. Available configuration
options are described in the following sections.
Configuring Do Not Disturb, Call Waiting, and Call Blocking
You can configure call preferences, such as Do Not Disturb and Call Waiting, by
accessing the following options:
• Do Not Disturb—Incoming calls do not reach your handset. (They will not
display in the Received Calls list.)
• Call Waiting—If call waiting is enabled, while on a call, a beep tone will alert
you of a second incoming call.
• Block Caller ID—Prevents your Caller ID information from being sent when
placing a call.
• Block Anonym Call—Blocks incoming calls to your handset from callers
who have blocked their Caller ID.