Filter
Top Products
Using Your Cisco SPA302D
Configuring Phone Settings
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide 26
2
NOTE You can choose the outgoing line on a per-call basis by pressing and holding the
Start Call button. A list of lines that can be selected for an outgoing call appears.
Viewing the Line Status
You can view the status of all DECT Lines and the PSTN line by doing the following:
STEP 1 Press the center Select button to view the available preferences.
STEP 2 Scroll to Call Settings and press the center Select button again.
STEP 3 Select Line Status. The lines and status are displayed:
• Not Ready—The SIP line is not registered.
• Ready—The SIP line is registered.
• In Use—The SIP line is in on a call.
• Busy—The maximum number of calls in use for a SIP line has been reached.
Configuring Phone Settings
To reach the Settings menu, press the center Select button, scroll to Settings,
and press the Select button again.
In the Settings menu, press the arrow buttons to select the settings you want to
change and press the Select button. You can perform the following tasks or
configure the following options from the Settings menu:
• Handset Registration—See “Registering the Handset to the Cisco
SPA232D Mobility Enhanced ATA” section on page 11.
• Network Settings
• SIP Settings
• Ringtones
• To n e s
• Backlight Settings