Filter
Top Products
Using Your Cisco SPA302D
Placing a Call
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide 15
2
Placing a Call
To place a call, do one of the following tasks:
• Enter the number on the keypad and press the green Start Call button.
• To use the speakerphone, enter the number on the keypad and press the
Speakerphone button.
NOTE Depending on your phone system or dial plan configuration, you may have to enter
a digit, such as 9, before entering the number to place an external call.
Adjusting Handset Volume and Muting
To adjust the audio volume during a call:
• Press the Right Arrow button on the 4-way navigation keypad to increase
the volume.
• Press the Left Arrow button to decrease the volume.
To adjust the ringtone volume when a call is not in progress:
• Press the Right Arrow button to increase the volume.
• Press the Left Arrow button to decrease the volume.
To turn off the ringer, continue to press the Left Arrow button until the message on
the display and the ringer off icon indicate that the ringer is turned off.
To mute the handset microphone, press the Mute button on the handset. The mute
icon appears at the top of the handset display.