Filter
Top Products
Getting Started
Installing the Cisco SPA302D
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide 12
1
STEP 7 Enter the PIN code (available from your phone system administrator). By default,
there is no PIN code. Press the Left softkey to confirm that you want to register the
handset. The “registering” message appears.
To verify that the handset registered to the base station, confirm that the DECT
signal strength icon is solid (not flashing) and that the handset ID, such as Handset
1 (or Handset 2), appears near the top right corner of the display screen.
Deregistering the Handset
To remove the association between the Cisco SPA302D handset and the Cisco
SPA232D base station, you must deregister the handset.
STEP 1 On the Cisco SPA302 handset, press the Select button in the center of the 4-way
navigation keypad.
STEP 2 Using the navigation arrow buttons, scroll to the Settings icon and press the
center Select button to select it.
STEP 3 Select Handset Registration.
STEP 4 Select Deregister.
STEP 5 Enter the PIN code (available from your phone system administrator). By default,
there is no PIN code; however, a PIN code may be set by your administrator to
prevent inadvertent deregistration of another handset. Press the Left softkey to
confirm.
STEP 6 A list of all handsets registered to the Cisco SPA232D appears. Choose your
handset from the list and press the center Select button. (Be sure to choose the
correct handset.)