Filter
Top Products
Using Your Cisco SPA302D
Configuring Phone Settings
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide 28
2
SIP Settings
You can enter or modify the settings for your Session Initiation Protocol (SIP)
connection, which is the Voice over IP (VoIP) connection to the Internet.
NOTE You should only change this setting if advised to do so by your phone system
administrator. Only DECT Line 1 is configurable from the Cisco SPA302D handset.
Additional DECT Lines for VoIP are configurable by an administrator on the Cisco
SPA232D.
STEP 1 From the Settings menu, choose SIP Setting.
STEP 2 Enter the PIN code (available from your phone system administrator). By default,
there is no PIN code. Press Confirm.
STEP 3 Press the Up and Down Arrow buttons on the navigation keypad to scroll through
the following fields:
• Display Name—Identifier of DECT Line 1.
• User Name—SIP User Name of VoIP account.
• Password—SIP password of VoIP account.
• Proxy—The SIP proxy IP address of the VoIP service provider.
• Authen ID—An ID used by some VoIP service providers to authenticate
login information. Your phone system administrator can provide this
information if necessary.
STEP 4 Press Confirm to save your settings.
Changing Your Ringtone
To change your handset ringtone:
STEP 1 From the Settings menu, choose Ringtones.
STEP 2 Press the Up and Down Arrow buttons to select a ringtone. The ringtone plays.
STEP 3 Press Save to save the selected ringtone as the ringtone for your handset.