Filter
Top Products
5-52
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Dial Plan Parameters
Recommended Values:
• United States —2,4,25
• Sweden — 1,5,25
Voice Configuration Menu Access Code
929
Dial Plan Parameters
This section describes the configurable parameters related to dial plans:
• DialPlan, page 5-52
• DialPlanEx, page 5-60
• IPDialPlan, page 5-60
DialPlan
Description
The programmable dial plan is designed for the service provider to customize the behavior of the
Cisco ATA for collecting and sending dialed digits. The dial plan allows the Cisco ATA user to specify
the events that trigger the sending of dialed digits. These events include the following:
• The termination character has been entered.
• The specified dial string pattern has been accumulated.
• The specified number of dialed digits has been accumulated.
• The specified inter-digit timer has expired.
Value Type
Alphanumeric string
Range
Maximum number of characters is 199.
Note If the dial plan exceeds 199 characters, use the DialPlanEx parameter instead of the DialPlan parameter.
For more information, see the “DialPlanEx” section on page 5-60.
Default
*St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.-
Voice Configuration Menu Access Code
926
Additional DialPlan Information
The DialPlan section contains the following additional topics that describe commands and rules for
creating your own dial plan, and includes many examples: