Filter
Top Products
5-28
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Operational Parameters
PaidFeatures
Description
Unsubscribe/subscribe to CallFeatures by setting each corresponding bit to either 0 or 1. The lower 16
bits are for the Phone 1 port, and the upper 16 bits are for the Phone 2 port. Table 5-3 provides
definitions of each bit.
Value Type
Bitmap
Default
0xffffffff
Voice Configuration Menu Access Code
315
Related Parameters
• CallFeatures, page 5-27
• CallCmd, page 5-29
• CallerIdMethod, page 5-38
• SigTimer, page 5-31
12-14
and
28-30
Reserved.
15 and 31 Fax mode. This service allows the user to set the Cisco ATA to Fax mode on a per-call basis. For Fax mode, use
the following settings:
• G711 codec only
• No silence suppression
• No FAX tone detection
Table 5-2 CallFeatures Parameter Bit Definitions (continued)
Bit
Number Definition
Table 5-3 PaidFeatures Parameter Bit Definitions
Bit Number Definition
0 and 16 Not used for H.323.
1 and 17 Not used for H.323.
2 and 18 Not used for H.323.
3 and 19 Caller Line Identification Restriction (CLIR)—0; Caller Line Identification Presentation (CLIP)—1
4 and 20 Call waiting
5 and 21 Three-way calling