Filter
Top Products
5-10
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Network Configuration Parameters
Default
0.0.0.0
Voice Configuration Menu Access Code
2
Related Parameters
• DHCP, page 5-8
• StaticIp, page 5-9
• StaticNetMask, page 5-10
StaticNetMask
Description
Use this parameter to statically assign the Cisco ATA subnet mask if the DHCP parameter is set to 0
Value Type
IP address
Default
255.255.255.0
Voice Configuration Menu Access Code
10
Related Parameters
• DHCP, page 5-8
• StaticIp, page 5-9
• StaticRoute, page 5-9
NTPIP
Description
This parameter is the NTP IP address, required if DHCP server does not provide one.
The Cisco ATA requires an NTP Server from which to obtain Coordinated Universal Time (UTC) to
time-stamp incoming calls (H.323 and SIP) to drive an external Caller-ID device.
DHCP may also supply a NTP server. If NTPIP is specified, it overwrites the value supplied by DHCP.
NTPIP is ignored if its value is 0 or 0.0.0.0.
The user must not specify a port parameter. The Cisco ATA uses the default NTP port only.
Value Type
IP address