Filter
Top Products
5-31
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Operational Parameters
FeatureTimer2
Description
This parameter provides configurable timing values for various Cisco ATA features, as described below:
• Bits 0-7—Maximum time that the Ethernet connection can be disconnected before the Cisco ATA
automatically reboots.
–
Range: 0 - 255
–
Factor: one-second increments
–
Values: 0 - 255 seconds
–
Default: 30 (equals 30 seconds)
Note To disable this feature, set the value of bits 0-7 to 0.
Value Type
Bitmap
Default
0x0000001e
Voice Configuration Menu Access Code
361
SigTimer
Description
This parameter controls various timeout values. Table 5-4 on page 5-32 contains bit definitions of this
parameter.
Value Type
Bitmap
Default
0x01418564
Voice Configuration Menu Access Code
318