Filter
Top Products
5-30
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Operational Parameters
FeatureTimer
Description
This parameter provides configurable timing values for various telephone features, as described below:
• Bits 1-15—Reserved.
• Bits 16-18—Configurable call waiting ring timeout. When a call arrives for a Cisco ATA port that
is in use and has call-waiting enabled, the Cisco ATA plays a call-waiting tone. If the incoming call
is not answered within a specified period of time, the Cisco ATA can reject the call by returning a
"486 Busy" response to the remote user agent.
You can configure FeatureTimer parameter bits 16-18 to specify the ringing period for incoming
call-waiting calls.
This feature can be disabled by either using the default value 0 or by setting bits 16-18 to a value
greater than the standard timeout for an incoming call as specified in SigTimer parameter bits 14-19.
When this feature is disabled, a "480 Temporarily Not Available" response is returned to the remote
user agent when the standard ring times out.
–
Range: 0 - 7
–
Factor: 10-second increments
–
Values: 0 to 70 seconds
–
Default: 0 (never timeout)
• Bits 19-31—Reserved.
Value Type
Bitmap
Default
0x00000000
Voice Configuration Menu Access Code
317