Cisco Systems 7960G IP Phone User Manual


 
10
2 Operating Your Phone
Basic: Place a Call
To place a call:
Lift
the handset and dial the number.
Dial the number
and then lift the handset.
Press
the line button for your extension, dial the number, and then lift the handset.
Press
any available button, dial the number, and then lift the handset.
Press th
e New Call soft key, dial the number, and then lift the handset.
Press
a speed dial button and then lift the handset.
If y
ou have selected a number from a directory, press the Dial soft key, and then lift the handset.
Speakerphone: Place a Call
To place a call using the speakerphone:
Press
the speakerphone button and perform the steps for placing a basic call, and do not lift the handset.
Perform
the steps for placing a basic call and do not lift the handset.
To switch to handset operation, lift the handset.
Headset: Place a Call
To place a call using a headset, press the heasdset button, then perform the steps for placing a basic call, and do not lift the
handset.
To switch to handset operation, lift the handset.
Answer a Call
To answer a call:
Lift
the handset.
If y
ou are using a headset, press the Headset button. If necessary, press the line button to select between incoming calls.
T
o use the speakerphone, press the Answer soft key or the Speaker button.
End a Call
To end a call:
Hang
up the handset.
If y
ou are using a headset, press the Headset button or EndCall.
If y
ou are using a speakerphone, press the Speaker button or EndCall.
Redial a Number
To redial the most recently dialed number:
Lift
the handset and press Redial.
Press Redi
al to dial using a speakerphone.
Hold a Call
To place a call on hold while on the call, press Hold.
To retrieve a held call, press Re
sume.