Cisco Systems 7937G Conference Phone User Manual


 
Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0 21
Meet-Me Conference Calls
You can create a Meet-Me conference by calling the Meet-Me conference station number at a specified
time. For additional instructions, see
Starting or Joining a Meet-Me Conference Call, page 22.
Starting and Joining a Standard Conference
A standard conference allows at least three participants to talk on a single call.
If you want to... Then...
Create a conference by
calling participants
Add new participants
to an existing
conference
1. From a connected call, press Confrn. (You may need to press the
more softkey to see Confrn.)
2. Enter the participant’s conference station number.
3. Wait for the call to connect.
4. Press Confrn again to add the participant to your call.
5. Repeat steps 1 to 4 to add additional participants.
Participate in a conference Answer the conference station when it rings.
Create a conference by
barging a call
Highlight a call on a shared line and press cBarge. (You may need to
press the more softkey to see cBarge.) See
Using a Shared Line, page 25.
View a list of conference
participants
1. Highlight an active conference.
2. Press ConfList.
Participants are listed in the order in which they join the conference
with the most recent additions at the top.
Get an updated list of
participants
While viewing the conference list, press Update.
See who started the
conference
While viewing the conference list, locate the person listed at the bottom
of the list with an asterisk (*) next to the name.
Drop the last party added
to the conference
Press RmLstC.
You can remove participants only if you initiated the conference call.
Remove any conference
participant
1. Highlight the participant’s name.
2. Press Remove.
You can remove participants only if you initiated the conference.
End your participation in a
conference
Hang up or press EndCall.
Tip
Depending on how the conference station is configured, if you leave a conference after creating it,
the conference might end. To avoid this, transfer the conference before hanging up.