Filter
Top Products
14
Step 4 Connect the power supply unit to the AC adapter port on the PIM, and plug the other end
into a standard electrical power outlet in the wall.
Step 5 If you are using the External Microphone Kit, connect each of the microphone extensions to
the microphone jacks installed on the bottom of the
Cisco Unified IP Conference Station 7936. See Figure 2 for an illustration of this connection.
Tip If you do not correctly connect the cables, PIM, power supply, and the microphone extensions,
the IP Conference Station will not work.
Use of non-Cisco-certified components may not work and may void the IP Conference Station
product warranty.
Startup Sequence
During the startup sequence, the LCD screen display shows the following messages.
Sequence Step LCD Screen Message Display
Startup—The startup process occurs about
15 seconds after power up.
Cisco Systems, Inc.
Polycom Technology
Copyright 2003
Configuring IP address—These messages appear
when the protocol is configuring the IP address.
Configuring IP
Press Menu to Reconfigure
TFTP configuration—This message appears when
connectivity is established with the TFTP server.
Station IP: IP address
Contacting: TFTP Server
Cisco Unified CallManager configuration—This
message appears when connectivity is established
with the Cisco Unified CallManager.
Opening: Cisco CallManager IP address
Cisco Unified CallManager registration—This
message appears while the device is registering
with the Cisco Unified CallManager.
Registering
Initialization complete. Press the Phone Key to get a dial tone